- 関連カテゴリ：
-
セール品
- 商品コード：
-
si-gridlok-lite-bk-11"～si-gridlok-lite-bk-8.5"
Strike Industries GRIDLOK LITE Rail for AR-15 BK
- 通常価格(税込)：
-
61,000～64,300
円
- 販売価格(税込)：
-
40,700
円
- メーカー：
- Strike Industries
納期：1-2日前後
BARREL NUT TORQUE: 30-50 ft/lbs (40.67-60.79 Nm)
INNER DIAMETER: Designed cut in front fits suppressors up to 1.57" (39.9mm) [necks down to inner diameter of 1.42" (36.0mm) after 3 inches from from of handguard] in diameter and all SI muzzle devices, including SI OPPRESSOR
-LENGTH: Rail listed lengths are exactly as stated from the face of the upper receiver to the front of the rail
-WIDTH: (from flat end to flat end) 44.75 mm (1.76")
-HEIGHT: (from bottom to top of Picatinny rail) 54.50 mm (2.15")
-WEIGHT W/ BARREL NUT:
-8.5": 11.8 oz
-11": 13.7 oz
-15": 1 lb 1.1 oz
-17": 1 lb 2.6 oz
-WEIGHT W/ PKG:
-8.5": 1 lb 3.9 oz
-11": 1 lb 5.9 oz
-15": 1 lb 10.6 oz
-17": 1 lb 12 oz
NOTE: The two locking screw at base can only be easily adjusted when the base is not mounted on barrel nut. It is NOT RECOMMENDED to adjust the locking tightness when you mount it on barrel nut. Installation video available.
Product Contents:
-x1 GRIDLOK® LITE rail
-x1 Barrel nut
-x1 Barrel nut shim kit (4-pcs)
-x1 Optional anti-rotation set screws
-x1 Barrel nut wrench
-x1 Locking lever tool
-x1 Hex tool (1.5mm)
-x1 Loctite® Threadlocker Blue 242®
-x1 Warning card
Product Features:
-1-pc free float handguard design to minimize weight and a cost-effective option
-Same Patent Pending Quick Rail Detach system as GRIDLOK® with redesigned locking button for easier QD latch locking
-Built-in flip up front BackUp Iron Sight (BUIS)
-Compatible with the M-LOK system at the 3, 6 and 9 o’clock locations
-Integrated 360° free swivel QD socket at rear of handguard
-Rear tabs with set screws help center top rail to upper receiver
-Designed cut in front fits suppressors up to 1.57" (39.9mm) [necks down to inner diameter of 1.42" (36.0mm) after 3 inches from from of handguard] in diameter and all SI muzzle devices, including SI OPPRESSOR
-Handguard machined from 6061-T6 aluminum
-Barrel nut machined from 7000 series aluminum which excels in applications requiring lightweight and high strength
COMPATIBILITY: Mil-Spec M4 upper receiver
NOT COMPATIBLE:
-Most piston gas blocks
-Some billet/side charging uppers
-11", 15", 17" with A2 Front Sight Post gas block
Torque: 30-50 ft/lbs (47.45-67.79 nM) for the barrel nut
